Color protection capability of PU paint enhanced with dispersed nano particles of TiO2, SiO2, ZnO, Nanoclay hydrophilic

Authors

  • Bui Van Viện Nghiên cứu Công nghiệp rừng, Viện Khoa học Lâm nghiệp Việt Nam
  • Nguyen Thi Hang Viện Nghiên cứu Công nghiệp rừng, Viện Khoa học Lâm nghiệp Việt Nam
  • Hoang Trung Hieu Viện Nghiên cứu Công nghiệp rừng, Viện Khoa học Lâm nghiệp Việt Nam
  • Hoang Thi Tam Viện Nghiên cứu Công nghiệp rừng, Viện Khoa học Lâm nghiệp Việt Nam
  • Bui Thi Thuy Viện Nghiên cứu Công nghiệp rừng, Viện Khoa học Lâm nghiệp Việt Nam

Keywords:

PU paint,, color protection, nano particle

Abstract

Wood used in outdoor conditions is extremely influenced by environmental factors such as light, temperature, humidity, wind and so on. These processes, at the same time are causing greatly effect on the durability of the wood, especially on the color of wood. Therefore, coating materials such as paints, varnishes, resinous oils... are employed on the surface of wood in order to reduce these adverse effects. In this study, polyureathane (PU) paint reinforcement with nano particles (TiO2, SiO2, ZnO and nanoclay) were investigated on Styrax tonkinensis (Pierre) Craib. ex Hardw and Acacia hybrid
wood. All samples were then exposed under natural environmental condition in 12 months. The results of this study were compared to those of common PU paint. It is indicated that with the use of 0.1% nano TiO2 (<100nm), 0.1% nano TiO2 (21nm), 0.1% nano ZnO and 0.1% nano clay could significantly increase wood color protection, the discoloration of both wood species coated with nano modified PU were less than 12%, while ordinary PU treated wood was 18%. This value of control samples was was 30%. From above indication, it can be concluded that the reinforcement of PU paint with nano particles can
significant reduce discoloration of wood.

References

1. Cao Quốc An, 2013. Nghiên cứu ứng dụng vật liệu nano để nâng cao chất lượng ván lạng, Báo cáo tổng kết đề tài cấp Bộ (2012 - 2013) - Bộ Nông nghiệp & PTNT.

2. Bùi Văn Ái, 2015. Nghiên cứu ứng dụng một số vật liệu nano nâng cao tính chất cơ học, vật lý và độ bền tự nhiên gỗ, Chương trình KHCN cấp Nhà nước KC.07/11 - 15.

3. Turkay Turkoglu, Ergun Baysal, and Hilmi Toker, 2015. The Effects of Natural Weathering on Color Stability of Impregnated and Varnished Wood Materials, Advances in Materials Science and Engineering.

4. Vu Manh Tuong, 2015. Fabrican of wood -nano composite to enhancing the water and UV light resistance of Acacia hybrid wood, Workshop Proceedings “Vietnam Forestry university - International Academy of wood science cooperation for development”, Ha Noi.

5. Carol A. Lausen, 2010. Weatherability and leach resistance of wood imprenated with nano - zinc oxide, nanoscale research letter, Vol 5, pp: 1464 - 1467.

6. Giovani De Filpoet, 2013. Preventing fungal growth in wood by titandium dioxide nanoparticles, International Biodetioration & Biodegradation, Vol 85, pp: 217 - 222.

7. Hao - Jie Song, 2010. A study of the tribological behavior of nano - ZnO - filled polyurethane composite coatings, Wear, Vol 269, pp: 79 - 85

Published

29-01-2024

How to Cite

[1]
Bui Van, Hang, N.T., Hieu, H.T., Tam, H.T. and Thuy, B.T. 2024. Color protection capability of PU paint enhanced with dispersed nano particles of TiO2, SiO2, ZnO, Nanoclay hydrophilic. VIETNAM JOURNAL OF FOREST SCIENCE. 4 (Jan. 2024).

Issue

Section

Articles

Most read articles by the same author(s)

1 2 3 > >>