APPLICATION OF SCIENCE AND TECHNOLOGY TO CONSTRUCTION MODEL FOR MANUFACTURING BIO-COMPRESSED TABLETS FROM WOOD PROCESSING SUPPLEMENTS AFTER WOOD PROCESSING FUEL FOR CIVIL, INDUSTRIAL AND EXPORT IN YEN BAI PROVINCE

Authors

  • Nguyen Van Giap Research Institute of Forest Industry
  • Le Thi Huong Research Institute of Forest Industry
  • Bui Duy Ngoc Research Institute of Forest Industry
  • Nguyen Van Dinh Research Institute of Forest Industry

Keywords:

Wood pellets, bio pellets, plantation wood, wood processing.

Abstract

The general trend of the world towards the use of clean renewable fuels (bio pellets, biofuels,..), environmental protection, limiting greenhouse effect and protecting the ozone layer. In the past few years, wood pellets, which are a type of biological pellets, are a fast-growing export item of Vietnam's wood processing industry. In 2022, the export volume will reach over 4.88 million tons, an increase of 39.35% compared to 2021, the export value will reach over $787 million, an increase of more than 90% compared to 2021. It is forecasted that in the coming time, Wood pellets have the potential to be included in the group of agricultural and forestry products with export turnover of over 1 billion USD. With such potential and important role, domestic wood pellet production technology is partly imported from abroad or self-made based on experience in small and medium enterprises. This significantly reduces the economic efficiency in the production of wood pellets in our country. With the research results that have been achieved on wood processing technology in general and wood pellet production technology in particular, the Forest Industry Research Institute can completely transfer it into practice, contributing to improving the value of wood pellets. and economic efficiency for businesses.


This article summarizes the results of the project "Application of science and technology to build a model of bio-pellet production from wood processing by-products as fuel for civil, industrial and service purposes export in Yen Bai province" under the Program to support the application and transfer of scientific and technological advances to promote socio-economic development in rural, mountainous and ethnic minority areas in the 2016-2025 period. Netma Joint Stock Company in Yen Bai is the technology receiver.

References

1. Viện Nghiên cứu Công nghiệp rừng, 2023. Báo cáo tổng kết dự án “Ứng dụng khoa học công nghệ xây dựng mô hình sản xuất viên nén sinh học từ phụ phẩm sau chế biến gỗ làm nhiên liệu đốt cho dân dụng, công nghiệp và phục vụ xuất khẩu tại tỉnh Yên Bái” thuộc Chương trình Nông thôn miền núi năm 2023.

2. Thủ tướng Chính phủ, 2015. Quyết định số 1747/QĐ-TTg ngày 13 tháng 10 năm 2015 phê duyệt Chương trình hỗ trợ ứng dụng, chuyển giao tiến bộ khoa học và công nghệ thúc đẩy phát triển kinh tế - xã hội nông thôn, miền núi, vùng dân tộc thiểu số giai đoạn 2016 - 2025.

3. Bộ Khoa học và Công nghệ, 2016. Thông tư số 07/2016/TT-BKHCN quy định quản lý Chương trình hỗ trợ ứng dụng, chuyển giao tiến bộ khoa học và công nghệ thúc đẩy phát triển kinh tế - xã hội nông thôn miền núi vùng dân tộc thiểu số giai đoạn 2016-2025.

4. UBND tỉnh Yên Bái, 2023. Quyết định số 448/QĐ-UBND ngày 03/4/2023 công bố hiện trạng rừng của tỉnh Yên Bái năm 2022.

5. Cục Thống kê tỉnh Yên Bái, 2022. Báo cáo số 1022/BC-CTK tình hình kinh tế, xã hội tháng 12 và cả năm 2022 của tỉnh Yên Bái.

Published

15-08-2023

How to Cite

[1]
Giap, N.V. et al. 2023. APPLICATION OF SCIENCE AND TECHNOLOGY TO CONSTRUCTION MODEL FOR MANUFACTURING BIO-COMPRESSED TABLETS FROM WOOD PROCESSING SUPPLEMENTS AFTER WOOD PROCESSING FUEL FOR CIVIL, INDUSTRIAL AND EXPORT IN YEN BAI PROVINCE. VIETNAM JOURNAL OF FOREST SCIENCE. 4 (Aug. 2023), 132–142.

Issue

Section

Articles

Most read articles by the same author(s)

1 2 3 > >> 

Similar Articles

1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.